BONDERITE M-CR 1001 AERO - ALODINE 1001 GALLON

This (part number 09-01628) is an Alodine coating which helps with protection before priming, and helps the primer adhere to the surface. The aluminum will first need to be etched prior to applying Alodine. AlumiPrep 33 (part number 09-01621) is an etch commonly used.

An epoxy primer is commonly used after the alodine, then the top coat. Depending on the area and type of clear coat being used, it may work, but we recommend contacting the clear coat manufacturer to verify it will work for each unique application.

The Alodine 1001 dries clear, and the Alodine 1201 is tinted so you can visually see where the material has been applied.

This is not recommended for long term protection as the rain or any water/liquid sprayed onto this will wash it off.

The tech data sheet is available for review in the document tab of our web page. Alodine is diluted with water at a one to one ratio for a brush on application, and 25:75 for immersion method. See TDS for details.

It is either sprayed on the surface or the the part is immersed in the product. The tech process does not show brushing as an approved application.